Smart Basic Timer

Main Features

• Main features
• 230v in and 230v (15 amp maximum) , timed output . ( plus option of constant 230v output if required )
• Time settings from 30 seconds to 15 minutes 30 seconds - these are the default times but other time values can be programmed
• Remote mechanical counter output signal of 12 volts dc
• Remote LED to show ‘board power on’ .
• Inputs can be stacking or non stacking
• ‘Minimum value’ start settings from 1 to 7 coins.
• Settings can be by ‘on board’ dip switches or by remote hand programmer. This gives you the choice of allowing easy resetting of times etc or keeping all changes secure with management.
• Easy access to dip switches.
• Electronic count is maintained on the board and this can be read and zero’d by the remote hand programmer. This acts as a
  security function because access to the reading is ONLY via the hand held programmer unit .
• All in a sealed , waterproof box and fully wired
• Internal transformer controlled by automatic thermal overload
  

  Click here to see our price list

6 Input Timer Mk2

Main Features

• Handles 6 inputs
• Works well with Brittania or similar electronic coin mech
• Provides 12v power for coin mech
• Works with any coin mech
• Push button on screen , programming
• Remote , backlit , LCD display for countdown
• Display can also show 6 individual counts & total
• Output for 6 mechanical counters
• 12v dc Alarm output signal
• Board controls 230 v power to provide one switched 230v output.
• 2 x 230v fuses for board and output power
• Switched power rated at 20amps
• Can replace Smart Twin timer.
• Ability to set minimum value before start

The unit comes wired with all cables necessary. 230v input and 230v timed output, 12v mechanical counter and alarm power output in 8 core cable and signal inputs via 8 core cable (speed control , remote start and 2 count/programming buttons ).

IMPORTANT……the factory fit a 10amp fuse on board the timer to protect the 230v output power . This fuse must be changed if necessary to suit customers own power values.

Click here to see our price list

EP2000 Mk6
(230mmx230m)

• 240v input, 12 relay output control device
  
• Unbelievable low cost programmer / controller
  
• The latest product combines all the components necessary to program and control automatic equipment such as jet-wash or car wash machines. It includes counters, relays, fuses, LED signals, timing countdown display and on or off the board programming. "On screen" charts allow anyone to program or re-program easily and quickly at no cost. Board can be used for 6 pre-programmed routines of 9 sequential activities or, for "buy-time" machines 8 activities can be selected at random by the user during the time period.
  
• Ability to set minimum value before start

  Click here to see our price list